Adaptor plates, release bearings and bolts that may be needed for your conversion.
| Image | Name | Price | |
 |
RS2000 Clutch Cable Adaptor Plate For use with RS2000 Type Bellhousing where a steel sump is used. (bolts not included)… OUT OF STOCK |
£12.00 |
|
 |
Fine Cap Head Bolts (4) 4 12mm x 1 1/2mm x 40mm long pitch fine cap head bolts for when a standard fitment bellhousing is specified. These bolts… |
£4.00 |
|
 |
Adaptor Plate for RS2000 Type Bellhousing to 2.8 Gearbox Adaptor plate which fits between the RS2000 Type Bellhousing and a Type 9 (Sierra) 2.8 gearbox. The 2.8 gearbox use… |
£45.00 |
|
 |
Longer Bellhousing Bolts for 2.8 Gearbox For use with the Adaptor Plate for RS2000 Type Bellhousing to 2.8. 4 longer bolts. These 25mm longer bolts accommodate… |
£4.00 |
|
 |
Slave Cylinder for Sierra Direct Replacement Hydraulic Clutch This slave cylinder fits directly inside our Sierra Direct Replacement Bellhousing and includes an adjustable pushr… |
£45.00 |
|
 |
Slave Cylinder for Duratec Engine to Ford Gearbox Hydraulic Clutch This slave cylinder fits directly inside our Duratec Engine to Ford Gearbox Hydraulic Clutch Bellhousing.… |
£95.00 |
|
.jpg "Adaptor Plate for Duratec Engine to Ford Gearbox Hydraulic Clutch") |
Adaptor Plate for Duratec Engine to Ford Gearbox Hydraulic Clutch Adaptor plate which fits between the Duratec Engine to Ford Gearbox Hydraulic Clutch Bellhousing and a Type E … |
£32.00 |
|
 |
Duratec to Ford Clutch Release Arm For AF14 Duratec Engine to Ford Gearbox to Ford T9 gearbox. For use in conjunction with Clutch Release Arm Pivot Pin a… |
£23.50 |
|
 |
Clutch Release Arm Pivot Pin For AF14 Duratec Engine to Ford T9 Gearbox. For use in conjunction with Clutch Release Arm and Release Bearing. Combina… |
£3.75 |
|
 |
Spigot bearing Converts crankshaft to accommodate a RWD gearbox. Fits in standard recess in crankshaft. Fits AF14 Duratec Engine to… |
£13.50 |
|
 |
Duratec Cable Clutch Release Bearing For use with the Duratec Engine to Ford Gearbox Cable Clutch Bellhousing. For use in conjunction with Clutch Release Ar… |
£27.50 |
|
 |
RS2000 Clutch Fork Genuine Ford RS2000 clutch fork. |
£32.00 |
|
 |
RS2000 Clutch Release Bearing Genuine Ford RS2000 clutch release bearing. Will fit most Ford Pinto or Zetec installations. |
£25.20 |
|
 |
Duratec RWD Wet Sump This is fabricated from steel, tig welded and fully baffled. It comes complete with dip stick, dip stick tube, oil pick … |
£320.00 |
|