Select Your Currency

Mustang Falcon Commodore Heavy Duty 8 1/2 Inch Clutch Friction Plate

Be the first to review this product

Availability: In stock

£126.00
OR

Quick Overview

Heavy duty 8 1/2" (215mm) clutch friction disc with a 10 teeth 1 1/16" spine pattern

Mustang Falcon Commodore Heavy Duty 8 1/2 Inch Clutch Friction Plate

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

Heavy duty 8 1/2" (215mm) clutch friction disc with a 10 teeth 1 1/16" spine pattern. This allows Borg Warner T5 gearboxes sourced from the USA and Australia with this spline configuration to connect to smaller diameter clutch setups such as those used in the Ford Pinto, Ford Zetec, Vauxhall 2.0XE and Saab B204/B234 engines.

Please refer to the Borg Warner T5 information page and chart to ensure that your input shaft has the correct number of teeth and diameter. You will need to carry out a final check on your own input shaft. The shaft spigot end may need to be ground shorter but will usually fit without modification.

If your input shaft spigot end is 19/32" (15mm) then our spigot bearing will fit inside most the crankshaft of the above donor engines and will accept your input shaft.

Specially made for RWD Motorsport. 

Suitable for use with any Borg Warner T5 gearbox and engine combination including:

Pinto or Cosworth to Borg Warner T5 Bellhousing
VW / Audi 1.8 Litre to Borg Warner T5 Bellhousing
Vauxhall 2.0XE Engine to Borg Warner T5 Bellhousing

Specification and Application

Components Heavy Duty Organic Clutch Plate
Clutch Torque Capacity 280 ft lb / 380 Nm
Clutch Friction Disc Thickness 0.33" / 8.5mm
FrictionDisc Diameter 8.5" / 215mm
Splines 10
Input Shaft Diameter 1 1/16" or (1.063 in or 27.0mm
Engine Any engine that either uses the Ford Pinto 8 1/2" clutch or that has sufficient diameter within the standard cover to accept an 8 1/2" / 215mm clutch
Compatible Lightened Flywheels Ford Duratec Lightweight Steel Flywheel - 8 1/2" Clutch Plate
Ford Zetec E Lightweight Steel Flywheel
Vauxhall 2.0XE Lightweight Steel Flywheel Ford Cover
Ford Pinto Lightweight Steel Flywheel - 8 1/2" Clutch Plate
Gearbox Borg Warner T5 * Borg Warner T5 information
Applications Kit cars
Rally / race
Fast road

Additional Information

Product Code AF72