8 1/2″ Clutch Cover and Friction Disc
8 1/2″ Clutch Cover and Friction Disc
£95.00
This high quality original equipment kit includes a standard clutch cover and friction disc.
Suitable for use with any Ford gearbox and engine combination including:
Duratec Engine to Ford Gearbox Cable Clutch Bellhousing (if using Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate)
Duratec Engine to Ford Gearbox Hydraulic Clutch Bellhousing(if using Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate)
Pinto or Cosworth to Borg Warner T5 Bellhousing
RS2000 Type Bellhousing (cable clutch)
Sierra Direct Replacement Cable Clutch Bellhousing
Sierra Direct Replacement Hydraulic Clutch Bellhousing
Friction plate thickness: 9mm.
Additional information
| Weight | 4.5 kg |
|---|
Related Products
Vauxhall 2.0XE Lightweight Steel Flywheel Ford Cover
Vauxhall 2.0XE Lightweight Steel Flywheel Ford Cover
Vauxhall 2.0XE Lightweight Steel Flywheel Ford Cover
Vauxhall 2.0XE Lightweight Steel Flywheel Ford CoverVauxhall 2.0XE (red top) lightweight steel flywheel to suit Ford 8 1/2″ friction clutch plate and Ford Pinto Vauxhall cover.
Machined from billet steel, our flywheels feature an integral ring gear. Much lighter than the original flywheel this flywheel is suitable for a standard or uprated Ford 8 1/2″ clutch plate Ford Pinto cover, allowing the engine to mate to 23 spline 1″ Type 9 or Rocket Ford gearboxes.
Ford Zetec E Lightweight Steel Flywheel
Ford Zetec E Lightweight Steel FlywheelFord Zetec E * lightweight steel flywheel to suit standard 220mm diameter Zetec E clutch cover and Ford 8 1/2″ clutch plate or Ford Pinto 8 1/2″ clutch plate and cover (comes pre-drilled to suit either option). Machined from billet steel, our flywheels feature an integral ring gear. Much lighter than the original, this flywheel is suitable for a standard or uprated Ford 8 1/2″ clutch.
Ford Pinto Lightweight Steel Flywheel – 8 1/2″ Clutch Plate
Ford Pinto Lightweight Steel Flywheel – 8 1/2″ Clutch Plate
Ford Pinto Lightweight Steel Flywheel – 8 1/2″ Clutch Plate
Ford Pinto Lightweight Steel Flywheel – 8 1/2″ Clutch PlateFord Pinto lightweight steel flywheel to suit Ford 8 1/2″ clutch plate. Machined from billet steel, our flywheels feature an integral ring gear. Much lighter than the original flywheel this flywheel is suitable for a standard or uprated Ford 8 1/2″ clutch.
Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate
Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate
Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate
Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate2.0 or 2.3* Ford Duratec lightweight steel flywheel to suit Ford 8 1/2″ clutch plate. With integral starter ring (ring gear is machined into the flywheel).
Products that you might find interesting
RWD Motorsport Heavy Duty Pinto Clutch Friction Plate
RWD Motorsport Heavy Duty Pinto Clutch Friction Plate
RWD Motorsport Heavy Duty Pinto Clutch Friction Plate
RWD Motorsport Heavy Duty Pinto Clutch Friction PlateHeavy duty organic clutch plate by RWD Motorsport. Fits Pinto applications and our Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate.
Recommended to be used together with our RWD Motorsport Heavy Duty Clutch Cover.
8 1/2″ Clutch Cover and Toyota W Series Spline Friction Disc
8 1/2″ Clutch Cover and Toyota W Series Spline Friction Disc
8 1/2″ Clutch Cover and Toyota W Series Spline Friction Disc
8 1/2″ Clutch Cover and Toyota W Series Spline Friction DiscThis high quality kit includes a standard clutch cover and Toyota W Series spline 8 1/2″ (215mm) friction disc.
Solid Centre 5 Paddle Heavy Duty 8 1/2 Inch Clutch Friction Plate
Solid Centre 5 Paddle Heavy Duty 8 1/2 Inch Clutch Friction Plate
Solid Centre 5 Paddle Heavy Duty 8 1/2 Inch Clutch Friction Plate
Solid Centre 5 Paddle Heavy Duty 8 1/2 Inch Clutch Friction PlateHeavy duty 8 1/2″ (215mm) clutch friction disc with a 23 tooth 1″ spine pattern
Ford Clutch Alignment Tool
Ford Clutch Alignment ToolClutch alignment tool for the 8.5″ Xflow and Pinto clutches. Also suitable for the 240mm Cosworth clutches with the 1″ x 23 spline input shaft.
Toyota 3 Cylinder Engine Heavy Duty 190mm Clutch Friction Plate Sprung Centre
Toyota 3 Cylinder Engine Heavy Duty 190mm Clutch Friction Plate Sprung Centre
Toyota 3 Cylinder Engine Heavy Duty 190mm Clutch Friction Plate Sprung Centre
Toyota 3 Cylinder Engine Heavy Duty 190mm Clutch Friction Plate Sprung CentreHeavy duty Toyota 190mm clutch friction disc with a 28mm diameter 21 spline centre hub.
TTV twin plate 7 1/4″ (184mm) paddle clutch
TTV twin plate 7 1/4″ (184mm) paddle clutchTTV Racing Twin Plate Race Clutch 184mm (7.25″)
