Duratec Water Manifold
Duratec Water Manifold
£231.53
Designed to simplify the cooling system when used in a longitudinal engine position. The depth from the rear cylinder head face is 60mm. Incorporates heater outlet. Comes with temperature gauge sender.
Specification and Application
| Component | Duratec Water Manifold |
| Type | Cast aluminium pipes and components |
| Engines | Ford 1.8 Duratec Ford 2.0 Duratec Ford 2.3 Duratec Ford 2.5 Duratec |
| Applications | Kit Cars Rally/Race – MkI/II Escort, Sierra, Lotus Cortina BriSCA F2 Classic Ford |
Additional information
| Weight | 4 kg |
|---|
Related Products
Duratec Exhaust Gas Recirculation Valve Blanking Plate
Duratec Exhaust Gas Recirculation Valve Blanking Plate
Duratec Exhaust Gas Recirculation Valve Blanking Plate
Duratec Exhaust Gas Recirculation Valve Blanking PlateThis aluminium blanking plate replaces the standard exhaust gas recirculation (EGR) valve on all Duratec engines. It improves engine power and assists engine tuning by allowing the engine to use fresh oxygen for the combustion process instead of using recirculated exhaust gas. Simply remove the existing exhaust gas recirculation valve and replace with the blanking plate using silicon gasket sealant. Image shows blanking plate on right and original exhaust gas recirculation valve on left.
Duratec Thermostat and Housing
Duratec Thermostat and HousingMechanically controlled and replaces standard Mondeo Duratec item that is controlled by the Mondeo ECU.
Products that you might find interesting
Duratec Hydraulic Clutch to Ford Type 9 Bellhousing Kit
Duratec Hydraulic Clutch to Ford Type 9 Bellhousing Kit
Duratec Hydraulic Clutch to Ford Type 9 Bellhousing Kit
Duratec Hydraulic Clutch to Ford Type 9 Bellhousing KitZetec SE or Sigma Billet Steel Oil Pump Gear Set
Zetec SE or Sigma Billet Steel Oil Pump Gear Set
Zetec SE or Sigma Billet Steel Oil Pump Gear Set
Zetec SE or Sigma Billet Steel Oil Pump Gear SetNew Billet steel oil pump gear set to suit the Ford Zetec SE, Sigma and TI VCT engines.
Duratec Starter Motor
Duratec Starter MotorThis starter motor can be used in conjunction with the Duratec Engine to Ford Gearbox Cable Clutch Bellhousing, Duratec Engine to Ford Gearbox Hydraulic Clutch Bellhousing, Duratec Engine to Borg Warner T5 or Tremec Gearbox Hydraulic Clutch Bellhousing and Duratec Engine to Toyota W Series Gearbox Bellhousing
Duratec Exhaust Gas Recirculation Valve Blanking Plate
Duratec Exhaust Gas Recirculation Valve Blanking PlateDuratec Exhaust Gas Recirculation Valve Blanking Plate
Duratec Exhaust Gas Recirculation Valve Blanking PlateThis aluminium blanking plate replaces the standard exhaust gas recirculation (EGR) valve on all Duratec engines. It improves engine power and assists engine tuning by allowing the engine to use fresh oxygen for the combustion process instead of using recirculated exhaust gas. Simply remove the existing exhaust gas recirculation valve and replace with the blanking plate using silicon gasket sealant. Image shows blanking plate on right and original exhaust gas recirculation valve on left.
Duratec Engine to Borg Warner T5 or Tremec Gearbox Hydraulic Clutch Bellhousing
Duratec Engine to Borg Warner T5 or Tremec Gearbox Hydraulic Clutch Bellhousing
Duratec Engine to Borg Warner T5 or Tremec Gearbox Hydraulic Clutch Bellhousing
Duratec Engine to Borg Warner T5 or Tremec Gearbox Hydraulic Clutch BellhousingThis bellhousing allows the 1.8l, 2.0l or 2.3l Duratec engine to be connected to the a Borg Warner or Tremec T5 gearbox using a hydraulic clutch.
Billet Aluminium Hydraulic Heavy Duty Release Bearing Seal Kit
Billet Aluminium Hydraulic Heavy Duty Release Bearing Seal Kit
Billet Aluminium Hydraulic Heavy Duty Release Bearing Seal Kit
Billet Aluminium Hydraulic Heavy Duty Release Bearing Seal KitReplacement seal kit containing 3 seals and the correct seal grease.
