Sunbeam or Avenger to Ford Bellhousing
Sunbeam or Avenger to Ford Bellhousing
£242.55
Talbot Sunbeam or Avenger 4 cylinder engine to Ford 4 speed or 5 speed Type 9 gearbox. Comes with the extended bolt which takes the standard clutch pivot.
Use in conjunction with the standard Sunbeam or Avenger release lever and bearing.
Use the standard Sunbeam 1″ 23 spline Sunbeam clutch plate.
Specification and Application
| Component | Sunbeam or Avenger alloy bellhousing |
| Type | Bare Casting Machined on front and rear faces Extended bolt to take the standard clutch pivot (not included) |
| Gearbox to Engine Face | 6.69 inch (170mm) |
| Engines | Sunbeam or Avenger 1.6 litre Ti or 2 litre Brazilian block |
| Gearboxes | Ford Type E (Rocket) 4 speed Ford Type 9 (Sierra) 5 speed * |
| Applications | Talbot or Chrysler Sunbeam Chrysler Avenger |
* 2.0l only; the 2.8l gearbox requires an additional adaptor plate due to the longer 1st motion shaft
Additional information
| Weight | 6 kg |
|---|
Products that you might find interesting
Duratec Engine to Borg Warner T5 or Tremec Gearbox Hydraulic Clutch Bellhousing
Duratec Engine to Borg Warner T5 or Tremec Gearbox Hydraulic Clutch Bellhousing
Duratec Engine to Borg Warner T5 or Tremec Gearbox Hydraulic Clutch Bellhousing
Duratec Engine to Borg Warner T5 or Tremec Gearbox Hydraulic Clutch BellhousingThis bellhousing allows the 1.8l, 2.0l or 2.3l Duratec engine to be connected to the a Borg Warner or Tremec T5 gearbox using a hydraulic clutch.
Honda K20 and K24 to Ford Type 9 Bellhousing
Honda K20 and K24 to Ford Type 9 Bellhousing
Honda K20 and K24 to Ford Type 9 Bellhousing
Honda K20 and K24 to Ford Type 9 BellhousingThis bellhousing will mate the Honda K20 or K24 engine to the Ford Type 9 gearbox, Ford 4 speed or any sequential gearbox that uses the Ford Type 9 pattern.
Duratec Engine to Toyota W Series Gearbox Bellhousing
Duratec Engine to Toyota W Series Gearbox Bellhousing
Duratec Engine to Toyota W Series Gearbox Bellhousing
Duratec Engine to Toyota W Series Gearbox BellhousingAllows the Ford Duratec engine to be mated to the wide range of Toyota W series 5 speed gearboxes available. These gearboxes, in particular the DW56 are a strong and slick shifting alternative to the Sierra 5 speed boxes, which are increasingly in short supply.
Vauxhall 2.0XE Engine to Ford Gearbox Cable Clutch Bellhousing 7 Degrees
Vauxhall 2.0XE Engine to Ford Gearbox Cable Clutch Bellhousing 7 Degrees
Vauxhall 2.0XE Engine to Ford Gearbox Cable Clutch Bellhousing 7 Degrees
Vauxhall 2.0XE Engine to Ford Gearbox Cable Clutch Bellhousing 7 DegreesThis bellhousing allows the Vauxhall 2.0XE Engine to be connected to the Ford Type E (Rocket 4 sp) and Type 9 (Sierra 5 sp) gearboxes using a cable clutch. The bellhousing allows the engine to be located in its original 7 degree position.
Zetec SE to Ford Gearbox Bellhousing
Zetec SE to Ford Gearbox BellhousingThis bellhousing will mate the Ford Zetec SE (Sigma)* engine to the Ford Type E (Rocket) 4 speed or Ford Type 9 (Sierra) 5 speed gearbox.
1KR-FE Toyota Engine to Toyota W Series Gearbox Bellhousing
1KR-FE Toyota Engine to Toyota W Series Gearbox Bellhousing
1KR-FE Toyota Engine to Toyota W Series Gearbox Bellhousing
1KR-FE Toyota Engine to Toyota W Series Gearbox BellhousingAllows the 1.0 litre Toyota 1KR-FE engine to be mated to the range of Toyota W series 5 speed gearboxes available in a longitudinal installation.
