Ford Duratec lightweight Steel Flywheel – 7 1/4″ Race Clutch Plate
Ford Duratec lightweight Steel Flywheel – 7 1/4″ Race Clutch Plate
£303.85
2.0 or 2.3 Ford Duratec lightweight steel flywheel to suit Twin plate 7 1/4″ paddle clutch. With integral starter ring (ring gear is machined into the flywheel)
Download a Fitting Guidance Notes document.
Please see our Ford Duratec Engine page for more information.
Specification and Application
| Component | Lightweight Steel Flywheel |
| Type | Replaces incompatible standard dual mass flywheel Integral starter ring |
| Weight | 4.2Kg |
| Diameter | 290mm total diameter including starter ring gear |
| Crank face to clutch face | 16mm |
| Engines | Ford Duratec HE |
| Clutches | Use with our Twin plate 7 1/4″ paddle clutch |
| Starter Motor | Ford Mondeo or Focus model number 1S7U 11000 AD or Duratec Starter Motor |
| Applications | Kit Cars Rally/Race – MkI/II Escort, Sierra, Lotus Cortina Classic Ford Fast Road |
* Please note that some Duratec 2.3 donor vehicles such as the Ford Ranger use a larger 116 teeth flywheel. The starter motor from these vehicles are not compatible with the smaller 112 tooth flywheel as they have a 10mm greater offset. Please use the standard Ford Mondeo or Focus stater motors.
Note:
You are able to use standard bolts with this flywheel but you will need to shorten them slightly so that they don’t bottom out when you tighten them (due to thinner flywheel face). Alternatively and for added security choose our Duratec ARP flywheel bolt set.
Additional information
| Weight | 5 kg |
|---|
Related Products
TTV twin plate 7 1/4″ (184mm) paddle clutch
TTV twin plate 7 1/4″ (184mm) paddle clutchTTV Racing Twin Plate Race Clutch 184mm (7.25″)
Duratec ARP flywheel bolt set
Duratec ARP flywheel bolt setFor all petrol Duratec engines 1.8 litre, 2.0 litre and 2.3 litre. Torque setting 105 ft lbs with 30W oil.
Bolt length under the head is 25mm.
Duratec Engine to Ford Gearbox Hydraulic Clutch Bellhousing
Duratec Engine to Ford Gearbox Hydraulic Clutch Bellhousing
Duratec Engine to Ford Gearbox Hydraulic Clutch Bellhousing
Duratec Engine to Ford Gearbox Hydraulic Clutch BellhousingThis bellhousing allows the 1.8l, 2.0l or 2.3l Duratec engine to be connected to the Ford Type E (Rocket 4 sp) and Type 9 (Sierra 5 sp) gearboxes using a hydraulic clutch.
Duratec Engine to Ford Gearbox Cable Clutch Bellhousing
Duratec Engine to Ford Gearbox Cable Clutch Bellhousing
Duratec Engine to Ford Gearbox Cable Clutch Bellhousing
Duratec Engine to Ford Gearbox Cable Clutch BellhousingThis bellhousing allows the 1.8l, 2.0l or 2.3l Duratec engine to be connected to the Ford Type E (Rocket 4 sp) and Type 9 (Sierra 5 sp) gearboxes using a cable clutch.
Products that you might find interesting
Cosworth smaller 9 bolt flywheel to suit Pinto 8 ½” clutch
Cosworth smaller 9 bolt flywheel to suit Pinto 8 ½” clutch
Cosworth smaller 9 bolt flywheel to suit Pinto 8 ½” clutch
Cosworth smaller 9 bolt flywheel to suit Pinto 8 ½” clutchSmaller 9 bolt flywheel to suit Pinto 8 1/2″ clutch. This will fit inside our bellhousings and will accept any Ford 8 1/2″ clutch.
Honda K20 Lightweight Steel Flywheel – Standard Clutch Plate
Honda K20 Lightweight Steel Flywheel – Standard Clutch Plate
Honda K20 Lightweight Steel Flywheel – Standard Clutch Plate
Honda K20 Lightweight Steel Flywheel – Standard Clutch PlateHonda K20 lightweight steel flywheel to suit standard clutch cover and plate. With integral starter ring (ring gear is machined into the flywheel)
Vauxhall XE ARP Flywheel Bolt Set
Vauxhall XE ARP Flywheel Bolt SetFor all petrol Duratec engines 1.8 litre, 2.0 litre and 2.3 litre. Torque setting 105 ft lbs with 30W oil.
Bolt length under the head is 25mm.
Honda K20 Lightweight Steel Flywheel – 7 1/4″ 184mm Race Clutch Plate
Honda K20 Lightweight Steel Flywheel – 7 1/4″ 184mm Race Clutch Plate
Honda K20 Lightweight Steel Flywheel – 7 1/4″ 184mm Race Clutch Plate
Honda K20 Lightweight Steel Flywheel – 7 1/4″ 184mm Race Clutch PlateHonda K20 lightweight steel flywheel to suit Twin plate 7 1/4″ paddle clutch. With integral starter ring (ring gear is machined into the flywheel)
Vauxhall 2.0XE Lightweight Steel Flywheel Standard Cover
Vauxhall 2.0XE Lightweight Steel Flywheel Standard Cover
Vauxhall 2.0XE Lightweight Steel Flywheel Standard Cover
Vauxhall 2.0XE Lightweight Steel Flywheel Standard CoverVauxhall 2.0XE (red top) lightweight steel flywheel to suit Ford 8 1/2″ friction clutch plate and standard Vauxhall cover. Machined from billet steel, our flywheels feature an integral ring gear. Much lighter than the original flywheel this flywheel is suitable for a standard or uprated Ford 8 1/2″ clutch plate and the standard Vauxhall cover, allowing the engine to mate to 23 spline 1″ Type 9 or Rocket Ford gearboxes.
Ford Twin Cam Lightweight Steel Flywheel to Standard Clutch 6 Bolt
Ford Twin Cam Lightweight Steel Flywheel to Standard Clutch 6 Bolt
Ford Twin Cam Lightweight Steel Flywheel to Standard Clutch 6 Bolt
Ford Twin Cam Lightweight Steel Flywheel to Standard Clutch 6 BoltFord twin cam lightweight steel flywheel to suit standard clutch. Machined from billet steel, our flywheels feature an integral ring gear. At 4.46Kg this flywheel is much lighter than the original flywheel.
Upsell Products
Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate
Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate
Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate
Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate2.0 or 2.3* Ford Duratec lightweight steel flywheel to suit Ford 8 1/2″ clutch plate. With integral starter ring (ring gear is machined into the flywheel).
