Select Your Currency

VW / Audi 1.8 Litre to Borg Warner T5 Bellhousing Uprated Clutch Kit

Be the first to review this product

Availability: In stock

£1,029.00
OR

Quick Overview

This bellhousing kit will mate the Volkswagen, Audi, SEAT or Skoda 1.8 litre 20 valve turbocharged engines to the Borg Warner T5 (2WD Cosworth) gearbox.

VW / Audi 1.8 Litre to Borg Warner T5 Bellhousing Uprated Clutch Kit

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

The kit includes the VW / Audi to Borg Warner T5 bellhousing, RWD Motorsport lightweight steel flywheel, Mondeo slave cylinder, heavy duty aluminium clutch pressure plate, heavy duty organic clutch plate, bellhousing bolts, gearbox bolts and slave cylinder mounting bolts.

The clutch will handle 385 ft lb or 520 Nm of torque.

The standard Mondeo slave cylinder, connects via an included adaptor directly to the bellhousing rear inner face. The nose of the T5 will need to be cut down to allow the slave cylinder to slide over but this will not affect the integral oil seal.

* Requires a spigot bearing from the longitudinal Audi A4 engine.
** Starter required is the Audi A4 1.8 turbo variant
*** The bottom bellhousing holes are spaced to fit the inline A4 sump. If using a transverse sump or other engine variants, the sump holes will not align. In a RWD application this is not a structural issue as the engine is supported at the midpoint and the engine / gearbox assembly is not subjected to the same forces.

Specification and Application

Components VAG 1.8 litre to Borg Warner T5 Bellhousing
VAG 1.8 litre to Borg Warner T5 Lightweight Steel Flywheel
Slave Cylinder
Clutch Pressure Plate
Organic Clutch Plate
Bellhousing Bolts
Gearbox Bolts
Slave Cylinder Bolts
Clutch Torque Capacity 385 ft lb or 520 Nm
Gearbox to Engine Face 7.48 inch (190mm)
Engine - 1.8 R4 20vT VW 1.8 litre 20 valve turbo (Polo, Golf, Bora, Passat, New Beetle, Jetta)
Audi 1.8 litre 20 valve turbo (A3, A4, A6, TT)
SEAT 1.8 litre 20 valve turbo (Ibiza, Cordoba, Cupra, Leon, Toledo)
Skoda 1.8 litre 20 valve turbo (Octavia)
Audi/VW 1.9 litre TDI engine
TSI engines
All Audi/VW water cooled 4 cylinder engines since 1975 *****
Gearbox Borg Warner T5 **** Borg Warner T5 information
Applications Kit cars
Rally / race

**** Please note that these engines share the same bellhousing pattern however we have only tested on the 1.8 litre 20 valve and 1.9 litre TDI engines.
***** Fits Sierrra Cosworth T5. The TVR gearbox flange is 4mm smaller in diameter and so will need spacing out. Mustang T5 has a different spline input shaft.

Additional Information

Product Code specvw

You may also be interested in the following product(s)