Vauxhall 2.0XE Lightweight Steel Flywheel Ford Cover
Vauxhall 2.0XE Lightweight Steel Flywheel Ford Cover
£292.17
Vauxhall 2.0XE (red top) lightweight steel flywheel to suit Ford 8 1/2″ friction clutch plate and Ford Pinto Vauxhall cover.
Machined from billet steel, our flywheels feature an integral ring gear. Much lighter than the original flywheel this flywheel is suitable for a standard or uprated Ford 8 1/2″ clutch plate Ford Pinto cover, allowing the engine to mate to 23 spline 1″ Type 9 or Rocket Ford gearboxes.
By reducing the weight of the flywheel over the standard Vauxhall item to as little as a half, the resulting reduced inertia gives better acceleration, especially in the lower gears. In addition, the reduced weight at the flywheel edges allows quicker gear changes, and increased engine braking. Comes with integral starter ring (ring gear is machined into the flywheel). Also includes uprated clutch retaining bolts.
Suitable for use with
Vauxhall 2.0XE Engine to Ford Gearbox Cable Clutch Bellhousing
Vauxhall 2.0XE Engine to Borg Warner T5 Bellhousing
Download a Fitting Guidance Notes document.
Specification and Application
| Component | Lightweight Billet Steel Flywheel |
| Type | Dynamically balanced with integral ring gear and to suit standard or uprated Ford 8 1/2″ 23 spline clutch, including uprated clutch retaining bolts |
| Benefits | Reduces the weight of the standard Vauxhall 2.0 16V cast iron flywheel |
| Weight | 4.5Kg |
| Engines | Vauxhall 2.0XE (Astra 16V) |
| Clutches | Recommended 8 1/2″ Clutch Cover and Friction Disc for fast road up to 150bhp AP Racing clutch cover CP2511-1 and AP Racing Heavy Duty Clutch Plate CP5352-5 for power greater than 150bhp or competition use. |
| Applications | Kit Cars Rally/Race – MkI/II Escort, Sierra, Lotus Cortina BriSCA F2 Classic Ford Fast Road |
Additional information
| Weight | 4.5 kg |
|---|
Products that you might find interesting
VW / Audi Lightweight Steel Flywheel
VW / Audi Lightweight Steel FlywheelVolkswagen / Audi lightweight steel flywheel to suit standard diameter VW / Audi clutch cover. Designed to replace the OE flywheel. Machined from billet steel, our flywheels feature an integral ring gear. Much lighter than the original flywheel.
Honda K20 Lightweight Steel Flywheel – Standard Clutch Plate
Honda K20 Lightweight Steel Flywheel – Standard Clutch Plate
Honda K20 Lightweight Steel Flywheel – Standard Clutch Plate
Honda K20 Lightweight Steel Flywheel – Standard Clutch PlateHonda K20 lightweight steel flywheel to suit standard clutch cover and plate. With integral starter ring (ring gear is machined into the flywheel)
Ford Pinto Lightweight Steel Flywheel – 8 1/2″ Clutch Plate
Ford Pinto Lightweight Steel Flywheel – 8 1/2″ Clutch Plate
Ford Pinto Lightweight Steel Flywheel – 8 1/2″ Clutch Plate
Ford Pinto Lightweight Steel Flywheel – 8 1/2″ Clutch PlateFord Pinto lightweight steel flywheel to suit Ford 8 1/2″ clutch plate. Machined from billet steel, our flywheels feature an integral ring gear. Much lighter than the original flywheel this flywheel is suitable for a standard or uprated Ford 8 1/2″ clutch.
Ford Zetec SE / Sigma Lightweight Steel Flywheel
Ford Zetec SE / Sigma Lightweight Steel Flywheel
Ford Zetec SE / Sigma Lightweight Steel Flywheel
Ford Zetec SE / Sigma Lightweight Steel FlywheelFord Ford Zetec SE (Sigma)* lightweight steel flywheel to suit standard diameter Zetec SE clutch cover. Designed to replace the OE flywheel. Machined from billet steel, our flywheels feature an integral ring gear. Much lighter than the original flywheel.
Vauxhall XE ARP Flywheel Bolt Set
Vauxhall XE ARP Flywheel Bolt SetFor all petrol Duratec engines 1.8 litre, 2.0 litre and 2.3 litre. Torque setting 105 ft lbs with 30W oil.
Bolt length under the head is 25mm.
