VW / Audi Lightweight Steel Flywheel
VW / Audi Lightweight Steel Flywheel
£397.34
Volkswagen / Audi lightweight steel flywheel to suit standard diameter VW / Audi clutch cover. Designed to replace the OE flywheel. Machined from billet steel, our flywheels feature an integral ring gear. Much lighter than the original flywheel.
Replaces the original flywheel on most VW / Audi 4 cylinder engines**. Comes with integral starter ring (ring gear is machined into the flywheel) and standard ECU trigger .
For use with the standard VW / Audi cover.
Suitable for use with our VW / Audi 1.8 Litre to Ford Type 9 Bellhousing and VW / Audi 1.8 Litre to Borg Warner T5 Bellhousing.
Download a Fitting Guidance Notes document.
* Starter required is the Audi A4 1.8 turbo variant.
Specification and Application
| Component | Lightweight Billet Steel Flywheel |
| Type | Dynamically balanced with integral ring gear to suit standard or uprated VW / Audi clutch cover and friction disc. |
| Benefits | Reduces the weight of the standard VW / Audi cast iron flywheel |
| Weight | 4.1Kg |
| Clutch Diameter | 240mm |
| Engines ** | VW 1.8 litre 20 valve turbo (Polo, Golf, Bora, Passat, New Beetle, Jetta) Audi 1.8 litre 20 valve turbo (A3, A4, A6, TT) SEAT 1.8 litre 20 valve turbo (Ibiza, Cordoba, Cupra, Leon, Toledo) Skoda 1.8 litre 20 valve turbo (Octavia) Audi/VW 1.9 litre TDI engine TSI engines All Audi/VW water cooled 4 cylinder engines since 1975 **** |
| Clutches | Standard or uprated VW or Audi |
| Applications | Kit Cars Classic Ford Fast Road |
** Please note that these engines share the same bellhousing pattern however we have only tested on the 1.8 litre 20 valve and 1.9 litre TDI engines.
Additional information
| Weight | 4.5 kg |
|---|
Related Products
Zetec SE ARP flywheel bolt set
Zetec SE ARP flywheel bolt setFor all Zetec SE engines 1.4, 1.6 and 1.7 litre. Torque setting 105 ft lbs with 30W oil.
Bolt length under the head is 25mm.
RWD Motorsport Heavy Duty Pinto Clutch Friction Plate
RWD Motorsport Heavy Duty Pinto Clutch Friction Plate
RWD Motorsport Heavy Duty Pinto Clutch Friction Plate
RWD Motorsport Heavy Duty Pinto Clutch Friction PlateHeavy duty organic clutch plate by RWD Motorsport. Fits Pinto applications and our Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate.
Recommended to be used together with our RWD Motorsport Heavy Duty Clutch Cover.
8 1/2″ Clutch Cover and Friction Disc
8 1/2″ Clutch Cover and Friction DiscThis high quality original equipment kit includes a standard clutch cover and friction disc.
Zetec SE to Ford Gearbox Bellhousing
Zetec SE to Ford Gearbox BellhousingThis bellhousing will mate the Ford Zetec SE (Sigma)* engine to the Ford Type E (Rocket) 4 speed or Ford Type 9 (Sierra) 5 speed gearbox.
Products that you might find interesting
Duratec ARP flywheel bolt set
Duratec ARP flywheel bolt setFor all petrol Duratec engines 1.8 litre, 2.0 litre and 2.3 litre. Torque setting 105 ft lbs with 30W oil.
Bolt length under the head is 25mm.
Vauxhall 2.0XE Lightweight Steel Flywheel Standard Cover
Vauxhall 2.0XE Lightweight Steel Flywheel Standard Cover
Vauxhall 2.0XE Lightweight Steel Flywheel Standard Cover
Vauxhall 2.0XE Lightweight Steel Flywheel Standard CoverVauxhall 2.0XE (red top) lightweight steel flywheel to suit Ford 8 1/2″ friction clutch plate and standard Vauxhall cover. Machined from billet steel, our flywheels feature an integral ring gear. Much lighter than the original flywheel this flywheel is suitable for a standard or uprated Ford 8 1/2″ clutch plate and the standard Vauxhall cover, allowing the engine to mate to 23 spline 1″ Type 9 or Rocket Ford gearboxes.
Ford Twin Cam Lightweight Steel Flywheel to Standard Clutch
Ford Twin Cam Lightweight Steel Flywheel to Standard Clutch
Ford Twin Cam Lightweight Steel Flywheel to Standard Clutch
Ford Twin Cam Lightweight Steel Flywheel to Standard ClutchFord twin cam lightweight steel flywheel to suit standard clutch. Machined from billet steel, our flywheels feature an integral ring gear. At 4.4Kg this flywheel is much lighter than the original flywheel.
Ford X/flow Lightweight Steel Flywheel
Ford X/flow Lightweight Steel Flywheel
Ford X/flow Lightweight Steel Flywheel
Ford X/flow Lightweight Steel FlywheelFord X-flow lightweight steel flywheel to suit Ford 7 1/2″ Clutch Plate. Machined from billet steel, our flywheels feature an integral ring gear. Much lighter than the original flywheel this flywheel is suitable for a standard or uprated Ford X-flow 7 1/2″ cutch plate and clutch cover. For the Lotus sunbeam choose the 8 1/2″ option*.
