Vauxhall 2.0XE Lightweight Steel Flywheel Standard Cover
Vauxhall 2.0XE Lightweight Steel Flywheel Standard Cover
£245.00
Vauxhall 2.0XE (red top) lightweight steel flywheel to suit Ford 8 1/2″ friction clutch plate and standard Vauxhall cover. Machined from billet steel, our flywheels feature an integral ring gear. Much lighter than the original flywheel this flywheel is suitable for a standard or uprated Ford 8 1/2″ clutch plate and the standard Vauxhall cover, allowing the engine to mate to 23 spline 1″ Type 9 or Rocket Ford gearboxes.
By reducing the weight of the flywheel over the standard Vauxhall item to as little as a half, the resulting reduced inertia gives better acceleration, especially in the lower gears. In addition, the reduced weight at the flywheel edges allows quicker gear changes, and increased engine braking. Comes with integral starter ring (ring gear is machined into the flywheel). Also includes uprated clutch retaining bolts.
Suitable for use with
Vauxhall 2.0XE Engine to Ford Gearbox Cable Clutch Bellhousing
Vauxhall 2.0XE Engine to Borg Warner T5 Bellhousing
Download a Fitting Guidance Notes document.
Specification and Application
| Component | Lightweight Billet Steel Flywheel |
| Type | Dynamically balanced with integral ring gear and to suit standard or uprated Ford 8 1/2″ 23 spline clutch, including uprated clutch retaining bolts |
| Benefits | Reduces the weight of the standard Vauxhall 2.0 16V cast iron flywheel |
| Weight | 4Kg |
| Engines | Vauxhall 2.0XE (Astra 16V) |
| Clutches | Recommended 8 1/2″ Clutch Cover and Friction Disc for fast road up to 150bhp (using original Vauxhall clutch cover) For power greater than 150bhp or competition use we recommend the Ford Heavy Duty Friction Plate with an uprated Vauxhall cover. |
| Applications | Kit Cars Rally/Race – MkI/II Escort, Sierra, Lotus Cortina Classic Ford Fast Road |
Additional information
| Weight | 4.2 kg |
|---|
Related Products
RWD Motorsport Heavy Duty Pinto Clutch Cover
RWD Motorsport Heavy Duty Pinto Clutch CoverHeavy duty organic clutch cover assembly by RWD Motorsport. Fits our Ford Pinto Lightweight Steel Flywheel – 8 1/2″ Clutch Plate and Ford Duratec lightweight Steel Flywheel – 8 1/2″ Clutch Plate.
8 1/2″ Clutch Cover and Friction Disc
8 1/2″ Clutch Cover and Friction DiscThis high quality original equipment kit includes a standard clutch cover and friction disc.
Vauxhall 2.0XE Engine to Borg Warner T5 Bellhousing
Vauxhall 2.0XE Engine to Borg Warner T5 Bellhousing
Vauxhall 2.0XE Engine to Borg Warner T5 Bellhousing
Vauxhall 2.0XE Engine to Borg Warner T5 BellhousingThis bellhousing allows the Vauxhall 2.0XE Engine to be connected to the Borg Warner T5 gearbox using a cable clutch.
Vauxhall 2.0XE Engine to Ford Gearbox Cable Clutch Bellhousing
Vauxhall 2.0XE Engine to Ford Gearbox Cable Clutch Bellhousing
Vauxhall 2.0XE Engine to Ford Gearbox Cable Clutch Bellhousing
Vauxhall 2.0XE Engine to Ford Gearbox Cable Clutch BellhousingThis bellhousing allows the Vauxhall 2.0XE Engine to be connected to the Ford Type E (Rocket 4 sp) and Type 9 (Sierra 5 sp) gearboxes using a cable clutch.
Products that you might find interesting
Ford Twin Cam Lightweight Steel Flywheel to suit Pinto 8 1/2″ Clutch
Ford Twin Cam Lightweight Steel Flywheel to suit Pinto 8 1/2″ Clutch
Ford Twin Cam Lightweight Steel Flywheel to suit Pinto 8 1/2″ Clutch
Ford Twin Cam Lightweight Steel Flywheel to suit Pinto 8 1/2″ ClutchFord twin cam lightweight steel flywheel to suit Ford 8 1/2″ clutch. Machined from billet steel, our flywheels feature an integral ring gear. At 4.6Kg this flywheel is much lighter than the original flywheel. The flywheel is suitable for a standard or uprated Ford X-flow 8 1/2″ cutch plate and clutch cover.
Ford Zetec SE / Sigma 1.4 Litre Lightweight Steel Flywheel
Ford Zetec SE / Sigma 1.4 Litre Lightweight Steel Flywheel
Ford Zetec SE / Sigma 1.4 Litre Lightweight Steel Flywheel
Ford Zetec SE / Sigma 1.4 Litre Lightweight Steel FlywheelFord Ford Zetec SE (Sigma)* lightweight steel flywheel to suit standard diameter Zetec SE clutch cover. Designed to replace the OE flywheel. Machined from billet steel, our flywheels feature an integral ring gear. Much lighter than the original flywheel.
Duratec ARP flywheel bolt set
Duratec ARP flywheel bolt setFor all petrol Duratec engines 1.8 litre, 2.0 litre and 2.3 litre. Torque setting 105 ft lbs with 30W oil.
Bolt length under the head is 25mm.
Ford Twin Cam Lightweight Steel Flywheel to Standard Clutch 6 Bolt
Ford Twin Cam Lightweight Steel Flywheel to Standard Clutch 6 BoltFord Twin Cam Lightweight Steel Flywheel to Standard Clutch 6 Bolt
Ford Twin Cam Lightweight Steel Flywheel to Standard Clutch 6 BoltFord twin cam lightweight steel flywheel to suit standard clutch. Machined from billet steel, our flywheels feature an integral ring gear. At 4.46Kg this flywheel is much lighter than the original flywheel.
Zetec SE ARP flywheel bolt set
Zetec SE ARP flywheel bolt setFor all Zetec SE engines 1.4, 1.6 and 1.7 litre. Torque setting 105 ft lbs with 30W oil.
Bolt length under the head is 25mm.
Duratec Cable Clutch to Ford Type 9 Bellhousing Kit
Duratec Cable Clutch to Ford Type 9 Bellhousing Kit
Duratec Cable Clutch to Ford Type 9 Bellhousing Kit
Duratec Cable Clutch to Ford Type 9 Bellhousing KitUpsell Products
Vauxhall 2.0XE Lightweight Steel Flywheel Ford Cover
Vauxhall 2.0XE Lightweight Steel Flywheel Ford Cover
Vauxhall 2.0XE Lightweight Steel Flywheel Ford Cover
Vauxhall 2.0XE Lightweight Steel Flywheel Ford CoverVauxhall 2.0XE (red top) lightweight steel flywheel to suit Ford 8 1/2″ friction clutch plate and Ford Pinto Vauxhall cover.
Machined from billet steel, our flywheels feature an integral ring gear. Much lighter than the original flywheel this flywheel is suitable for a standard or uprated Ford 8 1/2″ clutch plate Ford Pinto cover, allowing the engine to mate to 23 spline 1″ Type 9 or Rocket Ford gearboxes.
